Where:
Selecting product from the database
Declaring number of the controlled batch
Working mode local settings
Returning to the working mode home
screen
Control start
30.3. Local setting of a working mode
Local settings of the working mode < PGC> are accessible on pressing
a hot-key <
Local parameters> in the control settings window:
Gross weight on the display
Activation/deactivation of gross weight
display on the home screen
Save mode
Detailed description in ch. 24.1 of the user
manual
Number of accessible controls
Enabling simultaneous carrying out two
control processes (see ch. 30.12 of the
Ask for batch number
Function triggering providing batch number
before the start of control
Password required
Enabling the parameter requires Logging
in to the scale before each entering the
mode settings window
Saving notification window
Protection preventing record of unreliable
results of controlled product measurement.
Value expressed as deviation [%] form
nominal weight of controlled product.
Information about saved
measurement
Detailed description in ch. 24.10 of the
user manual
To Next Page
Loading...
