12.2. Return to weighing
Changes made to the scale’s settings are automatically saved in the memory
on returning to the main software window. The scale provides two ways of
returning to the main window:
• By pressing key for a few times until returning to the main window,
• By pressing
button or field located at the top bar.
13. WEIGHING
Put a load on the weight pan. When pictogram
is displayed the
indication is ready to read.
Caution:
A weighing can be saved after stabilising a measurement (pictogram
).
13.1. Conditions of operational use
In order to assure a long term operating period with appropriate measurements
following principles should be adhered to:
• Avoid applying mechanical shocks to the weight pan:
• Loads should be placed in the centre of the pan (eccentric errors
are outlined in PN-EN 45501 chapter 3.5 and 3.6.2):
To Next Page
Loading...
