RADWAG PUE HY10

31
14.4. Minimum weight for different functions (LO)
Parameter <LO THRESHOLD> is associated with automatic weighing.
Next weighing will not be saved until the indication goes under the
THRESHOLD LO (net).
Procedure:
• After entering < Threshold Lo> according to ch. 14 of this manual
a keyboard is displayed,
• Enter LO and confirm by pressing
.
14.5. Last digit
The last digit option < Last digit> is to switch off the last digit of measured
mass indication – the measurement is carried out with decreased accuracy.
Procedure:
• Enter group of parameters < Weighing> in accordance with ch.
14 of this user manual, select parameter <
Last digit> and set
its desired value.
Accessible settings:
Always
-
Last digit always visible
Never
-
Last digit always switched off
When stable
-
Last digit visible only on stable indication of mass