Procedure:
• Enter < Devices> parameter group as described in chapter
16 of the manual,
• Choose „ Computer / E2R System / System is active”
and then set an appropriate value.
Accessible settings:
• If during cooperation with <
E2R System> product selection lock
is required for operators, go to parameter <
Lock selecting
products> and set its value to
.
• pictogram is displayed at the home screen top bar to inform you that
<
System is active> parameter has been activated.
16.2. Printer
In < Printer> submenu users can:
• Set communication with a printer,
• Set code page of a printer,
• Set templates of printouts,
• Activate/deactivate printout of demanded standards.
To enter <
Printer>, press and then: „ Printer”.
To Next Page
Loading...
