RADWAG PUE HY10

187
PGC mode
5)
Submenu with data declared in the working
mode PGC (see ch. 30.4 of the manual)
Number of validity
dates
Number of days to calculate expiry date
Additional days of
expiry period
Offset of number of days of assortment expiry
date
Date
Constant product date
VAT
Value Added Tax in [%]
Ingredients
Dialogue box for entering ingredients
Label
Basic label template attributed to a product
C Label
Cumulative label template attributed to a
product
CC Label
Cumulative of cumulative label template
attributed to a product
Category
Category assigned to a product
Image
Graphic (image) assigned to a product
Identification process
Identification process assigned to a product
1) – Variable name dependant on an enabled working mode. In case of working
modes: Weighing, Dosing, Formulation, Density, Animal weighing the variable
takes the name: “Mass”. In case of the working mode “Parts counting” the
variable takes the name: “Part mass”. In case of the working mode “Percent
setup (Deviations)” the variable takes the name “Standard mass”.
2) – The variables accessible only in the working mode “Dosing”.
3) – The variable inaccessible for a product in the working mode “Formulation”.
4) – The variables accessible for a product only in the working mode “Formulation”.
5) – The variables accessible for a product only in the working mode “PGC”.
34.7.3. Database of clients
Procedure:
• Enter < Databases> according to ch. 34 of this manual,
• Enter <
Client> and press the required position.