16.2.1. Printer port
Procedure:
• Enter < Devices> parameter group as described in chapter 16
of the manual, choose „
Printer / Port” and then select an
appropriate option.
Printers can be attached to:
• RS232 (1),
• RS232 (2),
• USB,
• TCP.
16.2.2. Printer code page
Procedure:
• Enter parameters < Devices> as described in chapter 16
of the manual,
• Choose „
Printer / Code Page” then the screen keyboard
will be displayed,
• Write the required code page and confirm by pressing
.
Caution:
The default value is 1250 – code page for Middle-East Europe.
16.2.3. Templates for printouts
Enter < Printouts> to define printout templates.
Procedure:
• Enter parameter group < Devices> as described in chapter
16 of the manual, then choose „
Printer / Printouts”,
• After editing a template a memo box with the default content and the
screen keyboard,
To Next Page
Loading...
