RADWAG PUE HY10 - Page 53

53
Each programmable screen comprises the following components:
• mass,
• bargraph,
• workspace,
• buttons,
• chart,
• databases *.
*) – component intended for screen 1 and 2 exclusively:
• Component declared for screen 1 is automatically displayed within area of screen 1 and 3,
• Component declared for screen 2 is automatically displayed within area of screen 2 and 4.
For < Set default> function, default values for screen components of
particular working mode are set.
Each of the above listed components features declared area, the program
automatically reduces possibility of selection of particular components for a
given programmable screen. See the table below:
Mass Bargraph Workspace Buttons Chart Databases
1
- - -
2
- - -
3
- - -
4
- - -
5
- - - - -
6
- - - - -
Screen components can be combined (scaling) within programmable screens,
where:
• “Mass”
 Combining programmable screen 1 and 2
 Combining programmable screen 3 and 4
• “Bargraph”
 Combining programmable screen 1 and 2
 Combining programmable screen 3 and 4