3) – in case of declaring the value of the low deviation as greater than the
declared ingredient mass, the software displays the following message:
4) – in case the sum of ingredients mass and the value of high deviation
are exceeding the maximum capacity of a weighing platform, the software
displays the following message:
• On entering the required data press key which is equal to creating
a new ingredient and adding it to the formulation composition.
• A created entry on the list comprises: the folowing number on the list,
ingredient’s name (selected from the database of products) and mass
to be weighed.
• The software enables modifying an existing list of ingredients, i.e. adding
or deleting an ingredient, e.g. in order to add an ingredient press and hold
for about 4 seconds an entry on the list before which the ingredient should
be added. The following menu with below content is displayed:
Edit
Add
Delete
Cancel
• Press “Add” and define a new ingredient of a formulation.
• After specifying all ingredients of a formulation go back to the main
window by pressing
key.
To Next Page
Loading...
