2. The inserted code of the current ingredient is incorrect, and the ingredient
is not in the formulation composition. The software displays a message:
<No ingredient with specified code. Abort?>. On accepting the
message by pressing
key the software goes to another ingredient
on the list. If
key is pressed then the software returns to displaying
the editing window <Ingredient control> featuring the numeric keyboard
for entering the correct code of an ingredient.
3. If the inserted code of the current ingredient is correct, then the software
displays a message: <Correct Ingredient code> and goes to ingredient’s
weighing process.
• The workspace on the display indicates a bargraph denoting mass of
a weighed ingredient of a formulation and the following information:
Process in progress: Test formulation
Ingredient: 1 / 3 [ Ingredient 1 ]
Portion: 0 g / -500.0 g
Charge: 1 / 10
Completed: 0%
Where:
Process status
Name of prepared formulation
Ingredient: 1 / 3
Number of weighed ingredient / Total number of
ingredients in a formulation
Name of the weighed ingredient
Portion: 0 g
Current mass of the weighed ingredient
Current deviation from the reference mass
Number of weighed charge / Total number of charges
Completed: 0%
Process progress
Caution:
• If on process start the weighing platform is loaded, the software will
indicate message <Load appropriate product> while trying to accept a
measurement.
To Next Page
Loading...
