[CI]
Input condition
Conditional function, determining when the
followwing step should be carried out,
depending on status of indicator’s intput. Each
input can take the following status: None –
input disabled; „0” – input with low status; „1” –
input with high status; „/” – input with increasing
tendency (status change from low to high, e.g.:
the moment of pressing a key); „\” – input with
decreasing tendency (status change from high
to low, e.g.: the moment of releasing a key)
[EM]
Give mass
Function activating a so called: “mass in hand”
– ingredient’s mass of a dosing process
supplied in ready packages with precisely
determined mass. The given mass is added to
weighed ingredient’s mass, e.g.: ingredient to
be weighed = 21,8 kg, weighed amount 1,8 kg
placed on the scale, and 20 kg inserted
manually.
[ET]
Give number
of batching
repetitions
Function determining quantity of batches of
weighed ingredient, that is added to a dosing
process. Mass of a single batch is determined
in a product selected from the database
(Products database – field Mass). Product’s
mass is multiplied by a specific value, and such
determined mass is added to weighing process.
The function is applicable for weighing products
[F]
Set flags
Function determining a condition (characteristic
point) in dosing process. The function enables
conditional carrying out another step in dosing
process. Setting the characteristic point (signal
flags) in connection with condition flags enables
mutual conditioning of different processes on
different weighing platforms.
[CF]
Flags condition
Conditional function determining criteria for
events, which have to occur in order to carry
out the following step in dosing process.
[DG]
Gravitational
dosing
Function activating operation of automatic
weighment (automatic dosing), with option of
dosed mass flow measurement.
Mass
Mass of a component which is to be dosed-out
Percent
Mass threshold, given as a percentage [%],
automatic dosing is realized within this
threshold
Product
Dosing process component selected from
product database
Time correction
Time correction ± of closing a valve during the
dosing process, given as [ms]
To Next Page
Loading...
