RADWAG PUE HY10

110
Mass
Mass of an ingredient to be dosed
Mass for fast dosing
Mass of an ingredient for bulk dosing
(in case of two-step dosing process)
Product
Dosing process ingredient uploaded from
Products database
Down-weighing
Enables switching on checkweiging mode
(weighing on minus)
[O]
Outputs
Function enabling setting the status of
indicator’s outputs for controlling peripheral
devices plugged to those outputs. Accessible
settings: None – output disabled; “0” – output
with low status; “1” – output with high status.
[TI]
Delay
Function determining interval between
carrying out the following dosing process
steps. The function determines pending time
for the following step counted in seconds.
Time
Determination of pending time counted in
seconds
Description
Text description of an interval displayed on
indicator’s touch panel
[Z]
Zero
Zeroing the weighing platform, equal to
operation of the 0 function key on the
indicator’s front panel
[T]
Tare
Tarring the weighing platform, equal to
operation of the T function key on the
indicator’s front panel
[ST]
Set Tare
Tare setting function, equal to operation of
the <Set tare> function key on the indicator’s
front panel
[CM]
Weight condition
Weight condition function determining time in
which the following step of dosing process
ona weighing platform should be carried out,
e.g.: the following step is carried out if mass
(net or gross) placed on the weighing
platform is below the value set in threshold.
Threshold
Value of mass set in threshold for the
condition
Mass
Kind of determined mass for threshold (net or
gross)
Weight condition
Weight condition – “>=” or “<”