RADWAG PUE HY10

119
11. [T] Tare Tare Tarring the weighing platform no. 1
12. [DH] Dose
manually
0,4 kg [Sugar]
Manual weighing product Sugar to
obtain 0,4 kg mass
13. [TI] Delay
[5s] Unload container
with product
Pending for unloading the container with
“Sugar”
14. [CI] Input
condition
Input 4 – „/”
Input 4 has to take increasing tendency
– press function key confirming
unloading a container from the weighing
platform
15. [O]
Outputs
Output 2 – „1”
Signal on completing dosing ingredient
“Sugar”
16. [Z] Zero Zero Zeroing the weighing platform no. 1
17. [CI] Input
condition
Input 5 – „1” Confirm pouring ingredients to a mixer
18. [F] Set
flags
Signal flag 1 – „1”
Setting the characteristic point of the
process, which is a condition for carrying
out part of the process on the weighing
platform no. 2
19. [O]
Outputs
Output 5 – „1”
Lighting up a signalling device
confirming pouring the ingredients to
the mixer
20. [CF] Flags
condition
Signal flag 1 – „1”
Signal flag 2 – „1”
Pending for automatic dosing of water
on the weighing platform no. 2
21. [TI] Delay
[5s] Place container
Seasoning on the
weighing platform
Pending for loading container
“Seasoning” on the weighing platform
no. 1
22. [CI] Input
condition
Input 1 – „/”
Confirm loading of container
“Seasoning”
23. [T] Tare Tare Tarring the weighing platform no. 1
24. [DH] Dose
manually
0,25 kg [Seasoning]
Manual weighing product Seasoning to
obtain 0,25 kg mass
25. [TI] Delay
[5s] Unload container
with product
Pending for unloading the container with
“Seasoning”
26. [CI] Input
condition
Input 4 – „/”
Input 4 has to take increasing tendency
– press function key confirming
unloading a container from the weighing
platform
27. [O]
Outputs
Output 3 – „1”
Signal on completing dosing ingredient
“Seasoning”
28. [TI] Delay
[10s] Dosing
completed
Displaying a text message on the
indicator confirming completion of
dosing process