Caution:
1. Additionally, an operator can:
• Assign a product to a transaction by pressing
button,
• Assign a client to a transaction by pressing
button.
2. Before starting a transaction, first an operator should select a
vehicle to be weighed. Otherwise the scale displays a message
<
Vehicle not selected>.
• After the vehicle enters onto the weighbridge (entrance), and stabilizing
of the measuring result, accept the measurement by pressing
button,
which opens the following window:
Where:
PL 45332
8880 kg
2015.07.17 12:10:08
- A vehicle with saved registration number, accepted
mass on entrance and time and date of entrance
weighment
Exit
- Transaction type (exit)
To Next Page
Loading...
