R&S FSPN - Page 375

Remote Control
R&S
®
FSPN
375User Manual 1179.4363.02 ─ 01
Return values:
<Level> Phase noise level at the spot noise position.
Default unit: dBc/Hz
Example: See CALCulate<n>:SNOise<s>[:TRACe<t>]:
USERdefined[:STATe].
Usage: Query only
Manual operation: See "Spot Noise" on page 91
DISPlay:SNINfo[:STATe]
<State>
This command turns the display of spot noise information in the diagram area on and
off.
Parameters:
<State> ON | OFF | 1 | 0
*RST: ON
Example: //Display the spot noise information
DISP:SNIN ON
Manual operation: See "Displaying spot noise information" on page 119
DISPlay:SNINfo:TRACe <Trace>
This command selects the trace for which spot noise information is evaluated.
Parameters:
<Trace> Range: 1 to 6
*RST: 1
Example: //Evaluate spot noise for trace 2.
DISP:SNIN:TRAC 2
Manual operation: See "Displaying spot noise information" on page 119
11.6.6.4 Spur Display
DISPlay[:WINDow<n>]:TRACe<t>:SPURs:SUPPress........................................................376
DISPlay[:WINDow<n>]:TRACe<t>:SPURs:THReshold.......................................................376
[SENSe:]SPURs:SORT.................................................................................................. 376
[SENSe:]SPURs:WEIGhting............................................................................................377
[SENSe:]SPURs:FILTer:MODE........................................................................................377
[SENSe:]SPURs:FILTer:HARMonics................................................................................ 377
[SENSe:]SPURs:FILTer:RANGe...................................................................................... 378
[SENSe:]SPURs:FILTer:NAME?...................................................................................... 378
[SENSe:]SPURs:FILTer:OFFSet...................................................................................... 378
[SENSe:]SPURs:FILTer:CLEar........................................................................................ 378
Common Measurement Settings