R&S FSPN - Page 461

Remote Control
R&S
®
FSPN
461User Manual 1179.4363.02 ─ 01
Manual operation: See " Recall " on page 189
See " Recall in New Channel / Recall in Current Channel "
on page 192
MMEMory:STORe<1|2>:STATe <1>, <FileName>
This command saves the current instrument configuration in a *.dfl file.
Suffix:
<1|2>
.
irrelevant
Parameters:
<1>
<FileName> String containing the path and name of the target file.
The file extension is .dfl.
Example:
MMEM:STOR:STAT 1,'Save'
Saves the current instrument settings in the file Save.dfl.
Manual operation: See " Save File " on page 192
MMEMory:STORe<1|2>:STATe:NEXT
This command saves the current instrument configuration in a *.dfl file.
The file name depends on the one you have set with MMEMory:STORe<1|2>:STATe
on page 461. This command adds a consecutive number to the file name.
Suffix:
<1|2>
.
irrelevant
Example:
MMEM:STOR:STAT 1,'Save'
Saves the current instrument settings in the file Save.dfl.
MMEM:STOR:STAT:NEXT
Saves the current instrument settings in the file Save_001.dfl
MMEM:STOR:STAT:NEXT
Saves the current instrument settings in the file Save_002.dfl
Manual operation: See " Save File " on page 192
MMEMory:STORe<1|2>:TYPE <Type>
This command defines whether the data from the entire instrument or only from the
current channel is stored with the subsequent MMEM:STOR... command.
Suffix:
<1|2>
.
irrelevant
Parameters:
<Type> INSTrument | CHANnel
INSTrument
Stores data from the entire instrument.
Managing Settings and Results