R&S FSPN - Page 469

Remote Control
R&S
®
FSPN
469User Manual 1179.4363.02 ─ 01
HCOPy:PAGE:MARGin<1|2>:LEFT <arg0>
This command defines the margin at the left side of the printout page on which no ele-
ments are printed. The margins are defined according to HCOPy:PAGE:
MARGin<1|2>:UNIT on page 470.
Suffix:
<1|2>
.
1|2
Printing device.
Parameters:
<arg0> *RST: 4.23 mm
Example:
HCOP:PAGE:MARG2:LEFT 2
Manual operation: See " Margins " on page 205
HCOPy:PAGE:MARGin<1|2>:RIGHt
<arg0>
This command defines the margin at the right side of the printout page on which no
elements are printed. The margins are defined according to HCOPy:PAGE:
MARGin<1|2>:UNIT on page 470.
Suffix:
<1|2>
.
1|2
Printing device.
Parameters:
<arg0> *RST: 4.23 mm
Example:
HCOP:PAGE:MARG2:RIGH 2
Manual operation: See " Margins " on page 205
HCOPy:PAGE:MARGin<1|2>:TOP <arg0>
This command defines the margin at the top of the printout page on which no elements
are printed. The margins are defined according to HCOPy:PAGE:MARGin<1|2>:UNIT
on page 470.
Suffix:
<1|2>
.
1|2
Printing device.
Parameters:
<arg0> *RST: 4.23 mm
Example:
HCOP:PAGE:MARG2:TOP 2
Manual operation: See " Margins " on page 205
Managing Settings and Results