R&S FSPN - Page 205

Data Management
R&S
®
FSPN
205User Manual 1179.4363.02 ─ 01
Page settings are (printing) device-specific. That means you can configure two differ-
ent printing devices (for example, a printer and a file) and switch between configura-
tions easily simply by selecting the appropriate device before printing.
Page settings are only available when printing on a printer or to a PDF file (see " Desti-
nation " on page 203).
Select Device 1/2 ....................................................................................................... 205
Orientation ..................................................................................................................205
Windows Per Page .....................................................................................................205
Scaling ....................................................................................................................... 205
Margins ...................................................................................................................... 205
Select Device 1/2
Selects the printing device to be configured.
Two different printout devices can be configured, for example one for printing and one
for storage to a file. When you execute the "Print immediately" function, the selected
printing device and its settings determine the behavior of the R&S FSPN.
Orientation
Selects the page orientation of the printout: portrait or landscape.
Remote command:
HCOPy:PAGE:ORIentation<1|2> on page 470
Windows Per Page
Defines how many windows are displayed on a single page of the printout. This setting
is only available if Print Multiple Windows is active (see Chapter 8.4.1.1, "Print Content
Settings", on page 198).
If more than one window is printed on one page, each window is printed in equal size.
Remote command:
HCOPy:PAGE:WINDow<1|2>:COUNt on page 471
Scaling
Determines the scaling of the windows in the printout if Print Multiple Windows is active
(see Chapter 8.4.1.1, "Print Content Settings", on page 198).
If more than one window is printed on one page (see Windows Per Page ), each win-
dow is printed in equal size.
"Maintain
aspect ratio"
Each window is printed as large as possible while maintaining the
aspect ratio of the original display.
"Size to fit"
Each window is scaled to fit the page size optimally, not regarding the
aspect ratio of the original display.
Remote command:
HCOPy:PAGE:WINDow<1|2>:SCALe on page 471
Margins
Defines margins for the printout page on which no elements are printed. The margins
are defined according to the selected unit.
Creating Screenshots of Current Measurement Results and Settings