R&S FSPN - Page 470

Remote Control
R&S
®
FSPN
470User Manual 1179.4363.02 ─ 01
HCOPy:PAGE:MARGin<1|2>:UNIT <arg0>
This command defines the unit in which the margins for the printout page are config-
ured.
Suffix:
<1|2>
.
1|2
Printing device.
Parameters:
<arg0> MM | IN
MM
millimeters
IN
inches
*RST: MM
Example:
HCOP:PAGE:MARG2:BOTT 2
Manual operation: See " Margins " on page 205
HCOPy:PAGE:ORIentation<1|2> <arg0>
The command selects the page orientation of the printout.
The command is only available if the output device is a printer or a PDF file.
Suffix:
<1|2>
.
1|2
Printing device.
Parameters:
<arg0> LANDscape | PORTrait
*RST: PORTrait
Example:
HCOP:DEV:LANG1 PDF
HCOP:PAGE:ORI2 LAND
Manual operation: See " Orientation " on page 205
HCOPy:PAGE:WINDow<1|2>:CHANnel:STATe <arg0>, <arg1>
This command selects all windows of the specified channel to be included in the print-
out for HCOPy:CONTent on page 465.
Suffix:
<1|2>
.
irrelevant
Parameters:
<arg0> String containing the name of the channel.
For a list of available channel types use INSTrument:LIST?
on page 318.
<arg1> 1 | 0 | ON | OFF
Managing Settings and Results