R&S FSPN - Page 487

Remote Control
R&S
®
FSPN
487User Manual 1179.4363.02 ─ 01
Example:
DISP:ANN:CBAR OFF
Manual operation: See " Channel Bar " on page 219
DISPlay:ANNotation:FREQuency <State>
This command turns the label of the x-axis on and off.
Parameters:
<State> ON | OFF | 0 | 1
*RST: 1
Example:
DISP:ANN:FREQ OFF
Manual operation: See " Diagram Footer (Annotation) " on page 219
DISPlay:SBAR[:STATe] <State>
This command turns the status bar on and off.
Parameters:
<State> ON | OFF | 0 | 1
*RST: 1
Example:
DISP:SBAR:OFF
Manual operation: See " Status Bar " on page 219
DISPlay:SKEYs[:STATe] <State>
This command turns the softkey bar on and off.
Parameters:
<State> ON | OFF | 0 | 1
*RST: 1
Example:
DISP:SKEY:OFF
Manual operation: See " Softkey Bar " on page 219
DISPlay:TBAR[:STATe] <State>
This command turns the toolbar on or off.
Parameters:
<State> ON | OFF | 1 | 0
*RST: 0
Example:
DISP:TBAR ON
Manual operation: See " Toolbar " on page 218
Configuring the R&S FSPN