R&S FSPN - Page 501

Remote Control
R&S
®
FSPN
501User Manual 1179.4363.02 ─ 01
Parameters for setting and query:
<SnmpSysContact> String containing SNMP contact.
*RST: "" (empty string)
Example: //Set SNMP sysContact
SYST:COMM:SNMP:CONT 'ABC'
SYSTem:COMMunicate:SNMP:LOCation <SnmpSysLocation>
SYSTem:COMMunicate:SNMP:LOCation? <SnmpSysLocation>
This command sets the SNMP location information for the administrator.
Not setting the contact information via SCPI persistently allows to change this string via
SNMP.
Parameters for setting and query:
<SnmpSysLocation> String containing SNMP location.
*RST: "" (empty string)
Example: //Return SNMP location
SYST:COMM:SNMP:LOC?
SYSTem:COMMunicate:SNMP:USM:USER <Name>, <Access>, <Level>[,
<Auth_pwd>[, <Priv_pwd>]]
This command defines a SNMP user profile.
Prerequisites for this command:
●
Select SNMPv3 (SYSTem:COMMunicate:SNMP:VERSion on page 502).
Setting parameters:
<Name> String containing name of the user.
<Access> RO | RW
Defines the access right a user can have.
<Level> NOAuth | AUTH | PRIVacy
Defines the security level.
<Auth_pwd> String containing the authentication password.
<Priv_pwd> String containing the privacy password.
Example: //Create user profile
SYST:COMM:SNMP:VERS V123
SYST:COMM:SNMP:USM:USER 'Peter','RO','PRIV',
'1234','XYZ'
Usage: Setting only
SYSTem:COMMunicate:SNMP:USM:USER:ALL?
This command returns the number of users and a list of all SNMP users for SNMPv3.
Configuring the R&S
FSPN