R&S FSPN - Page 502

Remote Control
R&S
®
FSPN
502User Manual 1179.4363.02 ─ 01
Prerequisites for this command:
●
Select SNMPv3 (SYSTem:COMMunicate:SNMP:VERSion on page 502).
Return values:
<Count> Total number of registered SNMP users.
<Name> List of all user names as a comma-separated list.
Example: //Return all SNMP users
SYST:COMM:SNMP:USM:USER:ALL?
Usage: Query only
SYSTem:COMMunicate:SNMP:USM:USER:DELete <UserName>
This command deletes a specific SNMP user profile.
Setting parameters:
<UserName> String containing name of SNMP user profile to be deleted.
Example: //Delete SNMP user profile
SYST:COMM:SNMP:USM:USER:DEL "Peter"
Usage: Setting only
SYSTem:COMMunicate:SNMP:USM:USER:DELete:ALL
This command deletes all SNMP user profiles.
Example:
//Delete all SNMP user profiles
SYST:COMM:SNMP:USM:USER:DEL:ALL
Usage: Event
SYSTem:COMMunicate:SNMP:VERSion <SnmpVersion>
SYSTem:COMMunicate:SNMP:VERSion? <SnmpVersion>
This command selects the SNMP version.
Parameters for setting and query:
<SnmpVersion> OFF | V12 | V123 | V3 | DEFault
OFF
SNMP communication is off.
V12
SNMP communication with SNMPv2 or lower.
V123
SNMP communication with SNMPv2 and SNMPv3.
V3
SNMP communication with SNMPv3.
*RST: V123
Configuring the R&S FSPN