Rexroth Indramat ECODRIVE03 Series - Page 3

noitatnemucoD siht tuobAsrellortnoC evirD 30EVIRDOCE
Note: The following documentation is not required in its entirety for
project planning.
"Servo Applications with 1,5 s Acceleration Time"
- Selection lists -
DOK-ECODR3-SERV-GEN***-AUxx-MS-P
"Servo Applications with 400 ms Acceleration Time"
- Selection lists -
DOK-ECODR3-SERV-WZM***-AUxx-MS-P
"Main drives with 2AD-, ADF- and 1MB-motors"
- Selection lists -
DOK-ECODR3-MAIN*WZM***-AUxx-MS-P
"List of Connecting Cables for DIAX04 and ECODRIVE03"
- Selection lists -
DOK-CONNEC-CABLE*STAND-AUxx-EN-P
"ECODRIVE03 Drive for Machine Tool Applications With SERCOS-,
Analog- and Parallelinterface"
- Functional Description -
DOK-ECODR3-SMT-01VRS**-FKxx-EN-P
"ECODRIVE03 Drive for Machine Tool Applications With SERCOS-,
Analog- and Parallelinterface"
- Functional Description -
DOK-ECODR3-SMT-02VRS**-FKxx-EN-P
"ECODRIVE03 Drive for General Automation With SERCOS-, Analog-
and Parallelinterface"
- Functional Description -
DOK-ECODR3-SGP-01VRS**-FKxx-EN-P
"ECODRIVE03 Drive for General Auto
mation With Fieldbus-Interfaces"
- Functional Description -
DOK-ECODR3-FGP-01VRS**-FKxx-EN-P
"ECODRIVE03 Drive for General Automation With Fieldbus-Interfaces"
- Functional Description -
DOK-ECODR3-FGP-02VRS**-FKxx-EN-P
Supplementary documentation
customerservice@hyperdynesystems.com | (479) 422-0390