Rexroth Indramat ECODRIVE03 Series User Manual

xednIsrellortnoC evirD 30EVIRDOCE 17-1
17 Index
2
24V control voltage supply - BZM 6-9
24V control voltage supply (+24V and 0V) 4-45
24V control voltage supply (DKC**.3-016) 5-19
A
Absolute Encoder Emulation (SSI format) 4-84
Additional Accessories 13-4
Adress switch (DKC**.3-016) 5-44
Allowed DC bus continuous power (DKC**.3-016) 5-12
Allowed DC bus continuous power in single-phase mode with 50 Hz 4-36
Allowed DC bus continuous power in single-phase mode with 50 Hz (DKC**.3-
016) 5-13
Allowed DC bus continuous power in single-phase mode with 60 Hz (DKC**.3-
016) 5-14
Allowed DC bus continuous power without auxiliary components 4-28
Allowed DC bus Peak Power 4-27
Allowed DC bus Peak Power (DKC**.3-016) 5-12
Allowed encoder cable lengths 4-79
Ambient and operating conditions 4-5, 6-3, 7-3
Amplitude of the BZM control voltage charging current at startup, to selecting
power source 6-4
An Overview of Communications Interfaces 1-3
An Overview of Dr
ive Controllers and Auxiliary Components 1-3
An Overview of Individual Components of the ECODRIVE03 Family 1-2
Analog inputs 4-57
Analog inputs 1 and 2 4-57
Analog Interface 4-121
Analog outputs 1 and 2 4-58
Appropriate use
Introduction 2-1
Appropriate uses
Uses 2-2
Arranging ECODRIVE03 Components in the Control Cabinet 12-12
Autotransformer 10-1
Auxiliary capacitance module CZM01.3 7-1
Avoiding condensation 12-15
Avoiding dripping or spraying water 12-14
B
Basic connection of holding brake 4-72
Basic connection of holding brake (DKC**.3-016) 5-40
Basic connection of motor power 4-72
Basic connection of motor power (DKC**.3-016) 5-40
Basic connection of motor temperature monitoring 4-72
Basic connection of motor temperature monitoring (DKC**.3-016) 5-40
Bb 4-48, 5-22, 11-2
BZM 6-10
DKC 4-48
DKC**.3-016 5-22
Block diagram of the DKC**.3-016-7-FW power section 5-5
Block diagram of the DKC**.3-040-7-FW power section 4-10
Block
diagram of the DKC**.3-100-7-FW power section 4-11
Block diagram of the DKC**.3-200-7-FW power section 4-12
BR+, BR- 4-69
Bus Connector 4-111
BZM 6-1
C
Cable
Replacing 15-4
customerservice@hyperdynesystems.com | (479) 422-0390

Rexroth Indramat ECODRIVE03 Series Specifications

General

Brand	Rexroth Indramat
Model	ECODRIVE03 Series
Category	Controller
Language	English