Ricoh PRO C7210

1.SC Codes
120
SC No.
Level
Error Name/Error Condition/Major Cause/Solution
 Replace the controller board.
 Check the control panel harness.
SC No.
Level
Error Name/Error Condition/Major Cause/Solution
SC672-12
D
Controller start up error
Communication with controller was interrupted after a normal startup.
 Controller stalled
 Board installed incorrectly
 Controller board defective
 Operation panel connector loose, broken, or defective
 Controller late
 Turn the main power off/on.
 Check the connection of the controller board.
 Replace the controller board.
 Check the control panel harness.
SC No.
Level
Error Name/Error Condition/Major Cause/Solution
SC672-13
D
Controller start up error
The operation panel detected that the controller is down.
 Controller stalled
 Board installed incorrectly
 Controller board defective
 Operation panel connector loose, broken, or defective
 Controller late
 Turn the main power off/on.
 Check the connection of the controller board.
 Replace the controller board.
 Check the control panel harness.
SC No.
Level
Error Name/Error Condition/Major Cause/Solution
SC672-99
D
Controller start up error
The operation panel software ended abnormally.
 Controller stalled
 Board installed incorrectly
 Controller board defective
 Operation panel connector loose, broken, or defective
 Controller late