11.Image Quality Problem: Full Page
631
in more glossiness and causes color tone changing
Select No.1201-05 "Max Image Density: Clear/Special" in "Custom Paper Settings", adjust the
value in positive direction (+).
After taking the above measures, do the color calibration adjustment of the DFE.
Blurred Image: Around a Clear Image
Blurring occurs around a clear image.
Cause
When a clear image exists during image transfer, very small apertures are generated around the clear
image step. These apertures prevent reverse transfer of the color image. This results in the color image
being somewhat dark around the clear image.
This is likely to occur if:
When using in the high temperature and high humidity condition
There is a high image area ratio in the main scan direction of the downstream station.
To Next Page
Loading...
