Ricoh PRO C7210

1.SC Codes
377
Service Call 900-998 (Controller)
SC900 to SC998
SC NO.
Level
Error Name/Error Condition/Major Cause/Solution
SC910-00
B
External controller error 1
Notification from an application of the external controller
Refer to the instructions for the external controller.
Cycle the main power switch OFF/ON.
SC NO.
Level
Error Name/Error Condition/Major Cause/Solution
SC910-01
C
External controller error 1
The external controller receives the unexpected command from the engine side.
Refer to the instructions for the external controller.
-
SC NO.
Level
Error Name/Error Condition/Major Cause/Solution
SC910-02
C
External controller error 2
The external controller wrongly receives the command from the engine side.
Refer to the instructions for the external controller.
-
SC NO.
Level
Error Name/Error Condition/Major Cause/Solution
SC910-03
C
External controller error 3
The external controller receives the engine status out of specification.
Refer to the instructions for the external controller.
-
SC NO.
Level
Error Name/Error Condition/Major Cause/Solution
SC910-
10
C
External controller error 10
The external controller error is detected due to other reason shown in SC910-01
to -03.
Refer to the instructions for the external controller.
-
SC NO.
Level
Error Name/Error Condition/Major Cause/Solution
SC911-00
B
External controller error2
Notification from an application of the external controller
Refer to the instructions for the external controller.