11.Image Quality Problem: Full Page
645
This is likely to occur if:
When using in a high temperature, high humidity environment.
When using paper with highly smooth coating.
After continuous printing of jobs with low image area.
There are a small number of pages per set and post-processing machines are continuously
operated.
Solution 1
1. Check the counter of PM parts around the drum and then replace parts for which the counter has
been exceeded.
Execute No. 0201-01 "Execute Image Quality Adjustment: Adjust Image Density" in the Adjustment
Settings for Operators menu (SP3-011-002).
2. Print the image. Is the printed image acceptable?
YES: Finish
NO: Go to next step
3. Execute No. 0516-01 "Execute Developer Refreshing: CMYK" in the Adjustment Settings for
Operators menu (SP3-062-001).
4. Print the image. Is the printed image acceptable?
YES: Finish
NO: No further improvement can be expected in the field.
Solution 2
Perform if the problem is not solved by “Solution 1.”
To Next Page
Loading...
