6.Improving Throughput
534
*1 Checking the fusing capability
There is no toner coming off.
Toner does not come off when gently scratching the image with your nail
Toner does not come off when rubbing the image with the optical cloth.
It takes time to start printing after changing the temperature setting.
After taking the above measures, we recommend performing color calibration again for the
external controller.
Improving Productivity when Loading the Different Types/Thicknesses of paper
This solution is only for CE.
Cause 1
When the paper type/thickness differs, wait time occurs because the fusing nip unit is depressurized
and adjustment is performed to the specified fusing temperature. This wait time results in decreased
productivity. (In this case, the wait time is the time until entering the permissible temperature range for
To Next Page
Loading...
