11.Image Quality Problem: Full Page
618
Uneven Density
Low Image Density of Black Area
Cause
Compared to color toner, Bk toner has a lower transfer charge. Therefore, low image density is caused
by excessive transfer at the PTR unit.
This is likely to occur if:
Printing in the high temperature and high humidity condition
Printing in FC mode or FCS mode (These modes have a higher paper transfer current than B/W
mode.)
Solution
See the troubleshooting for Horizontal White Streaks: Around Black Text
Horizontal White Streaks: Around Black Text
The following unexpected images occur when printing a Bk image area in the FC mode.
Low image density on an entire page
Low density on sides of a text line
Streaks on sides of a text line
To Next Page
Loading...
