3.Troubleshooting: Paper Delivery Problems
483
Chapter 2. "Tray Heater for LCIT RT5110 (Service Option)" for installation procedure
Adjusting the Upper Limit Position (A3 LCIT)
Adjusting the Upper Limit Position (Bypass Tray)
Effect of Adjusting the Upper Limit Position
Adjusting the upper limit position lowers the upper limit position. (For dealing with repeated feeding
problems due to double feeding or double feeding as a bundle)
During paper feeding, this achieves the effect of fanning the paper by abutting it against the paper tray
plate for pre-separation (bank).
Be careful because when there is enough pre-separation, lowering the upper limit position
makes the unit prone to failure to feed.
1. Remove the cap cover.
2. Remove the right front cover ( x1).
To Next Page
Loading...
