3.Troubleshooting: Paper Delivery Problems
477
3. Clean the paper feed belt and pick-up roller in the detached paper feed unit.
4. After cleaning, restore the machine to its operational state.
No Feeding 3
Cause
Paper may fail to feed due to paper being too stiff.
This is likely to occur if:
The paper is thick.
Solution
Raise the maximum position of paper trays bottom plate.
Refer to “Adjusting the Upper Limit Position (A3 LCIT)".
Adjusting the Upper Limit Position (A3 LCIT)
Effect of Adjusting the Upper Limit Position
Adjusting the upper limit position lowers the upper limit position. (for dealing with repeated feeding
problems due to double feeding or double feeding as a bundle)
During paper feeding, this achieves the effect of fanning the paper by abutting it against the paper
To Next Page
Loading...
