11.Image Quality Problem: Full Page
623
machine even if the main power of the machine is turned off.
10. Print the target image. Is the printed image acceptable?
YES: Finish
NO: Go to next step.
11. Replace the charger unit.
If the problem cannot be solved by steps 5 to 9 above and if immediate response is necessary,
replace the charger unit.
Uneven Density within 90 mm of the Trailing Edge
Uneven image density (lower or higher) occurs within 90 mm of the trailing edge.
This is likely to occur if:
Printing in the low humidity and low temperature condition.
To Next Page
Loading...
