11.Image Quality Problem: Full Page
604
set SP2-109-006,007 (Test Pattern: Density: 1st, 2st) to "0".
5. Print 30 copies of a duplex 2-page job (60 pages of red (M and Y) solid images are output).
The fusing quality, do not print more than two colors at a time.
After taking the above measures, do the color calibration adjustment of the DFE.
Worm Holes: Text or Edge of an Image
Dropouts (character voids) occur when characters or lines are printed in color mode.
Cause
This problem occurs when pressure during transfer causes toner to contract at color texts where toner
deposits partially increase, or at the edge of solid images.
To Next Page
Loading...
