Ricoh PRO C7210

4.Troubleshooting: Post-Processing Option
508
Solution
1. Is the decurl unit installed?
Yes
Go to the next step.
No
Go to Step 4.
2. Set "1321-01: Correct Paper Curl: Correction Mode" to "Small" in the "Adjustment Settings for
Operators" menu.(SP 1-906-001 to 014: De-curler Setting Tray <number>:Paper Path Selection)
3. Print the image. Is the problem resolved?
Yes
Finished!
No
Go to the next step.
4. Load the paper the other way up.
5. Print the image. Is the problem resolved?
Yes
Finished!
No
Consult key operators.
 This folding error will not occur if uncurled paper is used or sheets that curl downward.
Matte Paper Scratched During Folding
The surface of matte finish paper shows scratches after folding.