3.Troubleshooting: Paper Delivery Problems
454
5. Wipe the Paper Exit Inverter Drive Roller [A] with a dry cloth.
Wipe the roller surface, while rotating the gear [B] at rear with pressing the cloth to the
roller
6. Wipe the Paper Exit Inverter Idle Roller [A] with a dry cloth.
Scratches, Streaks, Waves or Creases (Decurl Unit Line Speed Adjustment)
In a machine with decurl unit, the following problem occurs:
Copied paper has scratches or streaks
Noise during transferring
Copied paper has waves or creases in the vertical against paper transfer direction
Curl does not disappear even though a decurl unit is installed.
Cause
Incorrect paper transporting speed of decurl unit.
Incorrect correcting direction/strength of decurl unit.
To Next Page
Loading...
