Ricoh PRO C7210

1.SC Codes
386
Service Call 995 (Engine)
SC995 (Engine: Others)
SC No.
Level
Error Name/Error Condition/Major Cause/Solution
SC995-
01
D
CPM setting error 1
SC995-
02
D
CPM setting error 2
SC995-
03
D
CPM setting error 3
SC995-
04
D
CPM setting error 4
Comparison of machine serial number (11 digits) and machine identification code.
Machine serial number (11 digits) or machine identification code does not match.
SC995-01
 Contact your supervisor for details on how to enter the serial number and
destination code.
 Attach the NV-RAM that was installed previously.
SC995-02
 Attach the NV-RAM that was installed previously.
 Download data on the NV-RAM using SP5-825, and then turn the power
on/off.
SC995-03
 Replace it with a specified controller.
SC995-04
 Return the parts to the original configuration, and then replace them
according to the manual.