3.Troubleshooting: Paper Delivery Problems
419
If [1] < [2]: move the adjustor plate to the left.
9. Tighten the two screws loosened in step 7.
10. Re-attach the small cover, front cover of the left drawer, and handle B5.
11. Raise the handle B5 ( x1).
12. Close the right front door.
13. Set SP2-109-003 (Test Pattern: Pattern Selection) to “14 (Trimming Area)” and copy five sheets of
simplex print again.
14. Calculate the skew amount “[1] - [2]” on the output images to make sure the skew amount is
improved.
Calculation Formula:
A3 Skew = ([1] – [2]) / 293 x 200
DLT Skew = ([1] – [2]) / 275.4 x 200
Criteria:
If the skew of all the five copies are within 0.0±0.2 (Recommend Threshold), it is considered
skew has been improved.
J097 (Overskew)/ J098 (Shift Over) Appears
J097 (Overskew)
To Next Page
Loading...
