11.Image Quality Problem: Full Page
626
Cause
Mottled effect is caused by the following possible causes:
Low image transferring due to toner deterioration
Too high or too low of toner charge
End of unit life (ITB unit, PTR unit or developer).
Malfunction of image transfer roller or PTR unit
This is likely to occur if:
Using paper with low smoothness
Printing an image with low coverage continuously
Printing in the low humidity condition
Printing in the high humidity condition
Solution
For FC mode, if Bk is pale and there is a mottled effect, refer to Low Image Density of Black
Area
If there are round unprinted white spots, refer to White Spots/Toner Blasting.
To Next Page
Loading...
