Ricoh PRO C7210

1.SC Codes
372
Toner Interchange Unit Type S9
SC No.
Level
Error Name/Error Condition/Major Cause/Solution
SC799-
00
D
KS switch activation error
Mismatch between the setting of SP3-105-001 and the setting of KS switch
activation
 Harness: KS: Replacement: Control setting forgotten
1. Harness: KS: Replacement: Control (D0A55296) setting check
(Setting required for switching of KS)
2. Check that the harness of the IOB is set.
3. Replace Harness: KS: Replacement: Control (D0A55296).
4. Replace the PCB and IOB (D0A55502).
5. Set SP3-105-001 to "0".