4.Troubleshooting: Post-Processing Option
510
Solution
1. Open the guide plate and clean the metal plate at [A] with an alcohol dampened cloth.
2. Print and fold a sample. Is the problem resolved?
YES: Finished!
NO: Go to the next step.
3. Take a piece of paper and gently rub the surface of the metal plate to smooth it, and then do
another test. Is the problem solved?
YES: Finished!
NO: Repeat Steps 1 and 2. If the problem persists, consult key operators.
Cleaning the surface of the metal guide plate and buffing it with a piece of paper reduces the
occurrence of marks on the paper.
The present condition of the guide plate at the affected area depends on the amount of usage
of the folding unit, but buffing the surface of the plate with paper 20 to 50 times should reduce
friction during paper feed.
After buffing the paper, always clean the surface of the plate with a clean cloth dampened with
alcohol to remove tiny bits of paper that could adhere to the plate after buffing.
To Next Page
Loading...
