Ricoh PRO C7210

4.Troubleshooting: Post-Processing Option
490
4. Troubleshooting: Post-Processing Option
Finishing Problems: Finisher/Booklet Finisher
Large Paper Not Stacked Properly
Cause
When using large-size or coated and paper-to-paper friction is very high, a sheet may push against
another or paper deflection may occur.
This is likely to occur if:
 B4 LEF, 8"x14" LEF, or larger size of paper is used.
 Paper that produces high paper-to-paper friction is used.
 The temperature or humidity is high.
Sheet bending
The leading edge of the delivered sheet bends upward and backward.
[A]
Paper Exit
[B]
Output Tray
One sheet pushing out another
Because of high paper friction, the delivered sheet may get stuck and push out other sheets of paper.