Ricoh PRO C7210

11.Image Quality Problem: Full Page
643
Flowchart for Decreasing Set Temperature
*1:
A3 SEF more than 10 sheets.
*2:
If the print speed is set to "Middle", the temperature can be lowered by 5°C from the
temperature setting (present value) for High/Middle speed.
*3:
If the print speed is set to "Low", the temperature can be lowered by 20°C from the temperature
setting (present value) for High/Middle speed.
*4:
Guidelines for Fusing Quality
 No image peeling.
 No toner peeling even when rubbing the image gently with fingernails.
 No toner peeling even when rubbing the image with the optical cloth.
 After taking the above measures, do the color calibration adjustment of the DFE.