3.Troubleshooting: Paper Delivery Problems
445
Line speed of Transfer roller may be too slow:
The margin of the leading edge is too large, and the whole image stretches.
Exit roller is dirty.
Exit motor line speed, inverter entry speed, or inverter exit speed are Incorrect.
Solution (1)
If Transfer roller rotates too fast;
1. Take a note of the initial value of No. 1341-01 "Speed Adjustment: Transfer Timing Roller" in
"Custom Paper Settings".
2. Adjust the value of No. 1341-01 "Speed Adjustment: Transfer Timing Roller" by -0.1% step against
To Next Page
Loading...
