10.Image Quality Problem: Spots
592
Solution
When values of “1101-02: [Image Position: Image Position: Side 1: With Feed]” and 1101-04:
[Image Position: Image Position: Side 2: With Feed]” are adjusted in the positive direction, the
image moves to the right (trailing edge) and the leading edge margin widens. The trailing edge
margin narrows.
No. 1239-01, 03, and 04 [Margin: Leading Edge] are used to mask only the leading edge side
of the image (not printed).
The margin widths at the leading edge and the trailing edge remain the same. Increasing the
value increases the mask width (the margin becomes wider).
After taking the above measures, do the color calibration adjustment of the DFE.
To Next Page
Loading...
