3.Troubleshooting: Paper Delivery Problems
471
3. Slide the end fence against the paper so that the tab sheet holder's clips [B] pass through the fence
and click into place.
You can use the tab sheet holder for paper of the following sizes:
Paper with a width of 288.0–330.2 mm (11.34–13.00 inches) and a length of 182.0–487.7 mm
(7.17–19.20 inches).
Paper with a width of 139.7–287.9 mm (5.50–11.33 inches) and a length of 335.5–487.7 mm
(13.21–19.20 inches).
Cleaning the Paper Feed Path
Clean the paper feed path if white spots appear because of paper dust sticking to the paper, or if paper
misfeeding or double feeding occurs.
Guide Board
Wipe the guide board with a well-wrung-out damp cloth. To reach the inmost recesses, the cloth should
be the size of your palm.
Paper Feed Roller
Wipe the entire surface of the paper feed roller lengthwise with a well-wrung-out damp cloth, and then
with a dry, unused, lint-free cloth until no moisture remains.
Cleaning the Paper Feed Path in the A3 LCIT (Trays 3-5)
Clean the guide board and paper feed rollers in the A3 LCIT.
To Next Page
Loading...
