Ricoh PRO C7210

1.SC Codes
155
SC No.
Level
Error Name/Error Condition/Major Cause/Solution
SC720-16
B
Exit Motor Error 1(Proof Tray Exit)
Same as SC720-15
Same as SC720-15
 Replace the Proof Tray Exit Motor
 Reconnect the connectors.
 Replace the harnesses.
 Replace the Main Board.
SC No.
Level
Error Name/Error Condition/Major Cause/Solution
SC720-17
B
Exit Motor Error 2 (Shift Exit)
Same as SC720-15
Same as SC720-15
 Replace the Shift Exit Motor.
 Reconnect the connectors.
 Replace the harnesses.
 Replace the Main Board.
SC No.
Level
Error Name/Error Condition/Major Cause/Solution
SC720-18
B
Exit Motor Error 3 (Staple Exit)
Same as SC720-15
Same as SC720-15
 Replace the Staple Exit Motor
 Reconnect the connectors.
 Replace the harnesses.
 Replace the Main Board.
SC No.
Level
Error Name/Error Condition/Major Cause/Solution
SC720-
20
B
Junction Gate Motor Error 1 (Proof Tray)
 When moving to the home position, home position was not detected within
specified number of pulses. (The first time: jam display, the second time: SC)
 When moving from the home position, home position was still detected after
specified number of pulses. (The first time: jam display, the second time: SC)
 Motor defective
 Connecter disconnected
 Overload
 Home position sensor defective