Ricoh PRO C7210 - Page 203

1.SC Codes
199
SC No.
Level
Error Name/Error Condition/Major Cause/Solution
See SC750-27
 Right lower spine plate fan overloaded, defective
 Slave Control Board defective
 Reconnect the connector.
 Replace the right lower spin plate fan.
 Replace the slave board.
 Replace the motor harness.
SC No.
Level
Error Name/Error Condition/Major Cause/Solution
SC750-29
D
Perfect Binder: Spine plate upper fan (front) lock error
See SC750-27
 Front upper spine plate fan overloaded, defective
 Slave Control Board defective
 Reconnect the connector.
 Replace the front upper spine plate fan.
 Replace the slave board.
 Replace the motor harness.
SC No.
Level
Error Name/Error Condition/Major Cause/Solution
SC750-30
D
Perfect Binder: Spine plate upper fan (right) lock error
See SC750-27
 Upper right spine plate fan overloaded, defective
 Slave Control Board defective
 Reconnect the connector.
 Replace the upper right spine plate fan.
 Replace the slave board.
 Replace the motor harness.
SC No.
Level
Error Name/Error Condition/Major Cause/Solution
SC750-
31
D
Perfect Binder: Signature fan 2 (front) lock error
Front signature fan 2 failed to generate a lock signal within 12 sec., and signal
could be detected even after a re-try.
 Front signature fan 2 overloaded, defective
 Slave Control Board defective
 Reconnect the connector.
 Replace the front signature fan 2.
 Replace the slave board.