Ricoh PRO C7210

1.SC Codes
370
SC No.
Level
Error Name/Error Condition/Major Cause/Solution
 Connector disconnected
 Harness broken
 PCB defective
 PSU1 defective
 Reconnect the connector.
 Replace the PSU Cooling Fan 1 on the LCT3.
 Replace the harness
 Replace the PCB
 Replace the PSU2
SC No.
Level
Error Name/Error Condition/Major Cause/Solution
SC782-
06
B
LCT3: PSU Cooling Fan 2 error
Cooling fan alarm “H (error)” is detected while the PSU Cooling Fan 2 on the
LCT3 is ON.
 PSU Cooling Fan 2 on the LCT3 defective
 Connector disconnected
 Harness broken
 PCB defective
 PSU2 defective
 Reconnect the connector.
 Replace the PSU Cooling Fan 2 on the LCT3.
 Replace the harness
 Replace the PCB.
 Replace the PSU2.
SC No.
Level
Error Name/Error Condition/Major Cause/Solution
SC782-
08
B
LCT3: Transport Motor Cooling Fan error
Cooling fan alarm “H (error)” is detected while the Transport Motor Cooling Fan
on the LCT3 is ON.
 Transport Motor Cooling Fan on the LCT3 defective
 Connector disconnected
 Harness broken
 PCB defective
 Reconnect the connector.
 Replace the Transport Motor Cooling Fan on the LCT3.
 Replace the harness
 Replace the PCB.