4.Troubleshooting: Post-Processing Option
519
If the mounting screw is attached to the adjusting screw hole, unfasten it.
3. Turn the adjusting screw to adjust the deviation.
To increase the length at the bottom part of paper, turn the screw clockwise.
To decrease the length at the bottom part of paper, turn the screw counterclockwise.
4. Attach the mounting screw to fasten the adjusting screw.
If the mounting screw is attached to the adjusting screw hole, fasten it.
5. Close the front cover of the multi-folding unit.
For multi-sheet folding, the folding deviation that appears in the center of paper will be
adjusted.
To Next Page
Loading...
