Ricoh PRO C7210

1.SC Codes
52
03
Encoder 0: chattering
-
05
-
Encoder 1: no pulse
06
Encoder 0: no pulse
Encoder 1: no pulse
07
Encoder 0: pulse lack
Encoder 1: no pulse
08
Encoder 0: chattering
Encoder 1: no pulse
10
-
Encoder 1: pulse lack
11
Encoder 0: no pulse
Encoder 1: pulse lack
12
Encoder 0: no pulse
Encoder 1: pulse lack
13
Encoder 0: chattering
Encoder 1: pulse lack
15
-
Encoder 1: chattering
16
Encoder 0: no pulse
Encoder 1: chattering
17
Encoder 0 pulse lack
Encoder 1: chattering
18
Encoder 0: chattering
Encoder 1: chattering
51
Accumulation speed error
52
Consecutive load error
SC No.
Level
Error Name/Error Condition/Major Cause/Solution
SC442-
01
D
Image Transfer (1st) Contact error
SC442-
02
D
Image Transfer (YMC) Contact error
SC442-
03
D
Image Transfer (5st) Contact error
Even though the ITB Contact Motor rotates, the Image Transfer Contact Sensor
failed to detect the specified sensor feeler status within specified time.
 Image Transfer Contact Sensor dirty
 ITB Contact Motor/ Image Transfer Contact Sensor defective
 Harness damaged, disconnected
 Clean the parts.
 Replace the ITB Contact Motor/ Image Transfer Contact Sensor.
 Reconnect the harness.
SC No.
Level
Error Name/Error Condition/Major Cause/Solution
SC450-
01
D
ITB Power Pack error (leak): DC
SC450-
02
D
ITB Power Pack error (leak): AC
Condition 1